Dick Flemmingstraat 8c
5161 CB Sprang-Capelle
The Netherlands

Phone (+31)(0)(416)769050
Fax (+31)(0)(20)7537086
info@dpp-pultrusion.com

Rectangular

Suggested use:

Trailing edges, spars, structural elements, battens, etc.

Product description (mm)	Width	Thickness	Weight	Resin	Fibre
Carbon rectangular rod 1.00x0.40	1 - 0.05	0.4 + 0.02	0.5	epoxy	UD Carbon HT
Carbon rectangular rod 1.40x1.40	1.4 +/- 0.05	1.4 + 0.05	3.6	epoxy	UD Carbon HT
Carbon rectangular rod 2.00x0.40	2 - 0.05	0.4 + 0.02	1.1	epoxy	UD Carbon HT
Carbon rectangular rod 2.00x0.80	1.9 +/- 0.05	0.8 + 0.05	2.4	epoxy	UD Carbon HT
Carbon rectangular rod 3.00x0.40	3 - 0.1	0.4 + 0.05	1.7	epoxy	UD Carbon HT
Carbon rectangular rod 3.00x0.60	2.9 +/- 0.05	0.6 + 0.05	2.7	epoxy	UD Carbon HT
Highmod.carbon rectangular rod 3.00x0.60	3.0 - 0.15	0.6 + 0.05	2.7	epoxy	UD Carbon HM
Carbon rectangular rod 3.00x0.80	2.9 +/- 0.05	1.1 + 0.05	3.7	epoxy	UD Carbon HT
Carbon rectangular rod 4.00x0.60	3.9 +/- 0.05	0.6 + 0.05	3.6	epoxy	UD Carbon HT
Carbon rectangular rod 4.00x1.10	3.9 +/- 0.05	1.1 + 0.05	6.6	epoxy	UD Carbon HT
Highmod.carbon rectangular rod 4.00x1.10	4.0 - 0.15	1.1 + 0.05	6.6	epoxy	UD Carbon HM
Carbon rectangular rod 6.00x0.60	5.8 +/- 0.05	0.6 + 0.05	5.5	epoxy	UD Carbon HT
Highmod.carbon rectangular rod 6.00x0.60	5.8 +/- 0.05	0.6 + 0.05	5.5	epoxy	UD Carbon HM
Carbon rectangular rod 6.00x0.80	5.8 +/- 0.05	0.8 + 0.05	7.7	epoxy	UD Carbon HT
Carbon rectangular rod 7.00x0.30	7.2 +/- 0.10	0.3 + 0.05	3.4	epoxy	UD Carbon HT
Highmod. carbon rectangular rod 7.00x0.30	7.2 +/- 0.10	0.3 + 0.05	3.4	epoxy	UD Carbon HT
Carbon rectangular rod 8.00x0.80	7.7 +/- 0.05	0.8 + 0.05	10.2	epoxy	UD Carbon HT
Carbon rectangular rod 40.00x0,50	40.0 - 0.50	0.5 + 0.05	32.0	epoxy	UD Carbon HT

Standard length: 1 m. Other lengths possible on request.

ˆ Top | « Back